jump to navigation

GAM Application Story – Complete Gearbox and Coupling Assembly for Actuator System March 11, 2014

Posted by Servo2Go.com in Technical Support Information.
Tags: , , , , , , ,

Industry:  Material Handling

Application Challenge:  A customer was looking to drive two ball screws in unison using a single motor and also needed gear reducers to meet the application requirements.  The ball screws were in parallel and positioned eight inches (8”) apart from their centerlines.

GAM Solution: A traditional arrangement for this system would include a center driven dual output shaft gearbox in between two right angle gearboxes and connected using couplings.  However, because the actuators were so close together, this configuration was not possible.  GAM engineers relocated the motor perpendicular to the actuators by using two spiral bevel gearboxes (V-Series) in conjunction with a hollow output inline gear reducer (EPL-H).  All components were assembled together with precision machined adapters and bellows couplings.  The design was approximately twenty percent (20%) shorter than the traditional configuration and used fewer and more economical components resulting in a fifteen percent (15%) reduction in cost.

Typically, the customer would have to size and source the gear reducers from one company, the couplings from another company, design the system, and then ensure that it functions correctly.  Instead, the customer was able to get the complete solution (everything between the motor and actuator) from GAM.   GAM engineers not only sized and selected the appropriate gear reducers and couplings required for the application but also designed the mounting adapters necessary to complete the system.  One 3D model of the assembly was sent to the customer so that all they had to do was drop the file into their design for sign off, which helped to reduce the overall design time.

Results: Single point sourcing. -15% reduction in system cost. -20% reduction in system length. -Eliminated unnecessary components. -Shorter design time.

GAM Linear Mount Products – For everything between the motor and actuator. GAM linear mount products are an innovative line of gearboxes, couplings, and mounting adapters designed to improve the process of connecting motors to actuators.  Whatever the challenge, GAM has the products and design competencies to help with any actuator application.

Click on the link below to download the catalog in PDF format.

.PDF version of the catalog can be found here.

For additional information on the Gearbox & Coupling Products from Gam, click on the link below-


For more information, please contact:

Editorial Contact:

Warren Osak
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249

Tags:  Gam, Gam Gear, Servo2Go, Linear Mount Products, Coupling, Couplings, Gearbox, Gearboxes


No comments yet — be the first.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: