Digital Servo Amplifiers for Embedded Applications July 30, 2019
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, AMC, BLDC Drive, Servo Amplifier, Servo Drive, Servo2Go
add a comment
Greenville, DE — Servo2Go.com announces the release of the DZRALTE Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications!
The DZRALTE Series are digital servo drives that control brushed & brushless servomotors in a compact form factor which make them ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM) which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM drives. The command source can be generated internally or can be supplied externally. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
The DZRALTE Series feature a RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking. All drive and motor parameters are stored in non-volatile memory. Drive commissioning is accomplished using AMC’s powerful & user friendly free DriveWare software.
The combination of a DigiFlex® Performance™ DZRALTE servo drive with its DriveWare software establishes a new benchmark in versatility! Capabilities built into the DZRALTE servo drives include:
- Size Ranges: 10-175 VDC @ 6A to 30A continuous (60A peak) Output
- Full tuning control of all three servo loops: Position, Velocity and Torque
- Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
- Status window with over 50 simultaneous channels for drive and system diagnostics
- I/O configuration configurable to latch/non-latch as well as active-high & active-low
- Universal servo motor compatibility by means of automatic commutation adjustment
- Dual Loop Feedback – Increases both stability and accuracy
Additional information on the DZRALTE Series Servo Amplifiers can be found at- https://www.servo2go.com/catalogsearch/result/?q=DZRALTE
For more information, please contact:
Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Advanced Motion Controls, Servo Drive, Servo Amplifier, BLDC Drive, Servo2Go
New AxCent Servo Drives for Centralized Motion Control Systems September 9, 2016
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, AMC, AxCent, BLDC Drive, Servo Amplifier, Servo Drive, Servo2Go
add a comment
The AxCent™ (Axes for Centralized control schemes) product platform from Advanced Motion Controls Inc. brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.
AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.
CLICK HERE for more information.
Tags: AMC, Servo2Go, Advanced Motion Controls, AxCent, Servo Amplifier, Servo Drive, BLDC Drive
Advanced PCB Mount Servo Drives May 21, 2014
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, AMC, Automation, BLDC Drive, Motion Control, PWM Amplifier, Servo Amplifier, Servo Drive, Servo Driver, Servo2Go, Sine Drive, Trap Drive
add a comment
Z-Drives from Servo2Go.com are µ-sized plug-in style servo drives capable of torque, velocity & position modes for brushed, brushless or voice coil motors.
- Digital & Analog architectures
- CANopen, RS232/485 & EtherCAT networks
- Commands over the network or with I/O
- PCB mounting
- Feedback including: TTL Encoders, 1Vp-p Encoders, Absolute Encoders and Hall Sensors
- 3A-30A continuous (6A-60A peak) models
- 40-175 VDC output
- Extended Environment models
More information on PCB Mount Servo Amplifiers from Advanced Motion Controls can be viewed at –
http://www.servo2go.com/search.php?search=Z-Drive&D=PROD
Toll Free Phone: (877) 378-0240
Toll Free Fax: (877) 378-0249
E-Mail: Contact Us
Tags: AMC, Advanced Motion Controls, Servo2Go, PWM Amplifier, Servo Amplifier, Servo Driver, Servo Drive, Motion Control, Automation, BLDC Drive, Sine Drive, Trap Drive
Motion Control’s best kept secret… December 30, 2013
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, Automation, BLDC Drive, EtherNet/IP, Motion Control, PWM Amplifier, Servo Amplifier, Servo Drive, Servo Systems, Servo2Go
add a comment
ADVANCED Motion Control’s best kept secret is out. ADVANCED Motion Controls is the leader when it comes to customized servo solutions. To see for yourself they’ve compiled a list of their most notable and compelling custom servo drive solutions into one brochure. You’ll find multi-axis solutions, drives that perfectly fit into defined spaces, custom connectorization and a lot more. Download the .pdf at the link below.
http://www.a-m-c.com/download/promotion/customcapabilities.pdf
For more information, please contact:
Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Servo2Go, Advanced Motion Controls, Servo Amplifier, Servo Drive, PWM Amplifier, BLDC Drive, Automation, Motion Control
New Product Release: BLDC Drives and Motors from Applied Motion Products December 27, 2012
Posted by Servo2Go.com in New Product Press Releases.Tags: advanced control technology, applied motion product, Applied Motion Products, BLDC Drive, Brushless DC Motor, brushless dc motor drive, brushless dc motors, Brushless Motor, DC motor drive, Servo2Go
add a comment
Applied Motion Products is proud to announce the release of our new line of brushless DC motor drives. The BD5 is a brushless DC motor drive that is based on advanced control technology featuring excellent performance and ease of use. The drive is aimed at OEM applications that require high performance, high speed stability, basic speed control and low cost. Its velocity modes are controlled by way of analog or multispeed digital inputs. The supply voltage for the drive is 12 to 48 VDC (PS150A24 power supply recommended) with an operating current of 5 amps RMS continuous and a peak current of 10 amps RMS.
To compliment the BD5 drives, Applied Motion Products is offering three performance matched 42mm brushless DC motors. Maximum speed is 4500 rpm. Max continuous torque is 0.225 N-m (32 ounce-inches).
To aid in drive/motor placement, Applied Motion Product is offering two extension cables: a 1 meter cable, part number 3004-272-1M, and a three meter cable, part number 3004-272-3M.
More information on BLDC Drives and Motors from Applied Motion Products can be found at the link below-
http://www.servo2go.com/product.php?ID=105511&cat=
For more information, please contact:
Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Extended Environment Servo Amplifiers December 8, 2012
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, Automation, BLDC Drive, MIL-STD-810F, Motor Control, Motor Controller, Servo Amplifier, Servo Drive, Servo2Go, technology
add a comment
The DZX series of digital servo drives from Advanced Motion Controls are designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The command source can be generated internally or can be supplied externally. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
DZX amplifiers feature an RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking. Drive commissioning is accomplished using DriveWare available at http://www.a-m-c.com.
All drive and motor parameters are stored in non-volatile memory.
The DZX amplifiers conform to the following specifications and are designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.
>Extended Environment Temperature -40°C to +75°C (-40°F to +167°F)
> Storage Temperature -50°C to +100°C (-58°F to +212°F)
> Thermal Shock -40°C to +75°C (-40°F to +167°F) in 2 min.
> Relative Humidity 0 to 95% Non-Condensing
> Vibration 30 Grms for 5 min. in 3 axes
Z-Drives are a culmination of advances in manufacturing technology. By utilizing dual sided PCB boards, high efficiency power devices and creative design we are able to make the Z-Drives possible. These drives have been designed to be integrated into your PCB and come in multiple architechtures with features previously found only in larger drives. No wires and smaller size = less cost and easier installation – just plug’m in!
Features include:
- Four Quadrant Regenerative Operation
- Space Vector Modulation (SVM) Technology
- Fully Digital State-of-the-art Design
- Programmable Gain Settings
- Fully Configurable
- PIDF Velocity Loop
- PID + FF Position Loop
- Compact Size, High Power Density
- 16-bit Analog to Digital Hardware
For more information on the Extended Environment Servo Amplifiers from Advanced Motion Controls, click on the link below-
http://www.servo2go.com/search.php?search=Extended Environment&D=PROD
For more information, please contact:
Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com