jump to navigation

Zaber Releases New Low and High Vacuum Stages and Actuators November 10, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , ,
add a comment
  • The high-vacuum units are vacuum rated to 10^-6 torr. All components are chosen for low out-gassing and low CVCM.
  • The low-vacuum units are vacuum rated to 10^-3 torr and use vacuum compatible greases and epoxies. All have non-anodized components.
  • Only a 5 pin feed-through is required to operate multiple Zaber positioners in a vacuum chamber. *See below for more details.

    Zaber's Vacuum Compatible Stages & Actuators

  • You can easily make Zaber’s devices do a complicated series of moves with our free software.
  • You don’t need to worry about finding the right accessories. With the kit version, you get a power supply, data cables, and a serial adapter. The only other thing that you may need is a T-USB , which converts a USB port into an RS 232 serial port.
  • Installation is easy as 1-2-3: Connect the device to your computer; connect the power supply to your device; send instructions to your device from the computer.

*More Details:

Reduce Wiring/Feedthroughs by daisy-chaining devices with built-in controllers inside the vacuum chamber: Two or more devices can be daisy-chained inside a vacuum chamber, eliminating the need for extra feedthroughs. Just solder the signal wires directly from one device to the next in the chain. In addition, you can transmit power though data cables: Power to vacuum devices is transmitted through the data cables, eliminating the need for extra feedthroughs. A Zaber T-DSUB9-P (included with kits) is used to splice the power into the data cable – it is connected to the data cable outside the vacuum chamber.

Click on the link below for additional information-

Zaber’s Vacuum Compatible Stages & Actuators

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

New LSM Series Linear Stages from Zaber March 3, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , ,
add a comment

Zaber’s LSM series devices are motorized linear stages with high thrust and speed capabilities and a very compact size. They are designed to be used with our T-MCA controller, or can be used with any 2-phase stepper motor controller. At only 21 mm high, these miniature stages are excellent for applications where a small profile is required. The LSM’s innovative design allows speeds up to 58 mm/s and loads up to 10 kg. Like all Zaber’s products, the LSM series is designed to be ‘plug and play’ and very easy to set-up and operate when used with our T-MCA controller. The stages can be mounted in XY and XYZ configurations with no additional hardware.

Zaber's LSM Series

Series Overview: 

  • 25, 50, 100, 150 and 200mm travel 
  • 10kg load capacity and up to 58 mm/s speed  
  • Very low profile at only 21mm stage height 
  • Designed for Zaber’s T-MCA series stepper motor controller or can be used with any 2-phase stepper motor controller 
  • Using the powerful T-MCA external controller means that the unit can go faster than the T-LSM, with more thrust 
  • Can be mounted in XY and XYZ configurations

Click on the link below for additional information-

LSM Series Product Information 

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Learn to Wire and Program a Servo Actuator in 7 minutes! February 2, 2011

Posted by Servo2Go.com in Product Video's.
Tags: , , , ,
add a comment

Dyadic Systems have just released a short video on how to wire and program their SCN Series line of low-cost programmable electric linear actuators.

Dyadic Systems SCN Series Programmable Linear Actuators

 
Click on the following link to view the video: 
http://www.youtube.com/Servo2Go#p/c/C01A444752543A7D/0/IdnukwZMbcE

Information on Dyadic Systems’ programmable actuators can be found at: 
http://servo2go.com/supplier.php?id=1078787302

For more information, please contact: 

EDITORIAL CONTACT:
Warren Osak        warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Miniature Linear Stage Systems Feature Plug N’ Play Operation January 24, 2010

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , ,
add a comment

Greenville, DE-  Servo2Go has just added a new high performance linear stage series to its broad range of positioning systems.

Zaber T-LSM Series

Manufactured by Zaber Technologies Inc., the T-LSM series devices are computer-controlled motorized linear stages with high thrust and speed capabilities and a very compact size. They are stand-alone units requiring only a standard 15V power supply. A potentiometer knob at the end of the unit permits smooth manual control; turn it fully to get maximum speed. These slides connect to the RS-232 port of any computer and can be daisy-chained with up to 254 units per chain. They can also be chained with any other T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, a standard cable extension can be used.

Series Overview:

  • 25 to 200 mm travel (custom options available)
  • Max. centered load 100N
  • Built-in controller
  • Compact design featuring high speed, high thrust and high accuracy
  • Mounts in an XYZ configuration without any additional hardware
  • Several units can be daisy-chained to a single serial port

What You Really Need to Know:

  • This device comes with a built-in controller, which saves you time and effort
  • External controllers can be expensive, take up extra space, require more cables, and it is no fun to shop for them or program them. That’s why we built them into our devices!
  • You can easily make this device do a complicated series of moves with our free software
  • You don’t need to worry about finding the right accessories. With the kit version you get a power supply, data cables, and a serial adapter. The only other thing that you may need is a T-USB, which converts a USB port into an RS232 serial port

More information on the T-LSM series linear stages can be viewed at-

http://www.servo2go.com/product.php?ID=105215

For more information please contact:

sales@servo2go.com
Toll Free Phone:     877-378-0240
Toll Free Fax:        877-378-0249
www.servo2go.com