Shop for thousands of Motion Controls Products Online at Servo2Go.com November 11, 2016
Posted by Servo2Go.com in About Us, New Product Press Releases.Tags: Automation, Encoder, HMI, Motion Control, Servo Motor, Stepper Motor
add a comment
Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Servo2Go specializes in Automation & Motion Control Systems & Components including: Servo Motors & Drives, Stepper Motors & Drives, Automation & Motion Controllers, Positioning Systems & Actuators, Gearboxes, Couplings, Brakes, Encoders, Tachometers, HMI’s & Operator Displays, AC/DC Motors & Gearmotors, PLC’s and Embedded Controllers all supported via extensive product selection, just-in-time & consignment inventory, dedicated customer service and technical engineering support.
Introducing Galil’s Family of Motion Controllers April 13, 2016
Posted by Servo2Go.com in About Us.Tags: Automation, Galil, Motion Control, Motion Controller, Servo2Go
add a comment
Galil manufactures a wide range of single and multi-axis motion controllers designed to solve a wide range of motion control applications. For clarity, the controllers are broken down into their respective communication formats. The most common PC based solution is the plug and play PCI Bus. Other PC based form factors include ISA, VME, CompactPCI, and PC/104 boards. For applications where a Stand-Alone controller (not dependant on a PC) is needed, there are controllers with RS232, USB and Ethernet connectivity.
Galil’s Single / Multi-Axis Motion Controller Platforms includes:
- Stand-Alone Ethernet, RS232/RS422 & USB Controllers
- PCI, PC/104, Compact PCI, VME & ISA BUS Controllers
- Programming Software for Galil Motion Controllers
Galil Controller Accessories
Galil also provides many accessories such as interconnect modules and cables for fast and easy prototyping. Software tools such as WSDK for servo tuning and analysis, and an ActiveX Tool Kit speed system development. In addition, Galil offers servo motors and amplifiers to complement its line of controllers.
Since their introduction of the first microprocessor-based motion controller in 1983, Galil has remained the industry’s leading innovator. Galil’s unparalleled array of motion controllers – for both stepper and servo motors – is backed by superior technical support and can accommodate the most demanding applications – with absolute precision.
Over 500,000 controllers sold worldwide!
CLICK HERE to view the Galil Motion Control Product Family.
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
http://www.servo2go.com
Tags: Galil, Motion Controller, Servo2Go, Automation, Motion Control
Introducing Galil’s New C Programing Library June 10, 2015
Posted by Servo2Go.com in New Product Press Releases, Technical Support Information.Tags: API, Application Programming Interfaces, Automation, C Library, C Programming Library, Galil, Galil Motion Control, Motion Control, Motion Controller, Servo2Go
add a comment
gclib is a C-compatible application programming interface (API) for communicating with Galil motion controllers and PLCs.
Features include:
- Currently supports Windows, Ubuntu, Red Hat, and Fedora.
- C interface for maximum compatibility and portability.
- Extensive examples and support for multiple compilers.
- Open source component allows modifications in the field.
- Open source implementation of the GalilTools Communication Library (Galil.h) for existing code.
In February Galil introduced a new C application program interface (API) library. This library gives programmers access to powerful routines to interact with Galil motion controllers in a wide variety of application development environments. To download the APIs (Application Programming Interfaces) click on http://www.galil.com/downloads/api
Click on the link below to view Servo2Go’s family of Programmable Motion Controllers from Galil Motion Control.
http://www.servo2go.com/supplier.php?id=1031080104
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Galil, Servo2Go, Motion Control, Motion Controller, Motor Control, Automation, Servo System, Stepper System, C Library, API, Application Programming Interfaces, C Programming Library
Servo Solutions For Mobile Automation Challenges April 16, 2015
Posted by Servo2Go.com in News & Events, Webinars.Tags: AMC, Automation, Motion Control, Servo
add a comment
Join us for a Live Webinar on April 21, 2015 @ 11:00am EST
Space is limited. Reserve your Webinar seat now.
Register now to watch this webinar live or anytime after April 21, 2015.
Servo Solutions For Mobile Automation Challenges
With automation expanding out of the factory, machine builders are faced with a varying set of new challenges. Mobile platforms, such as unmanned systems, are expected to operate in extreme environments and carry their own power source; all while being light weight and compact.
To meet the current and future needs of the market, enabling technologies need to be applied and discovered. At the forefront of the enabling technologies are servo drive controllers.
Servo controllers not only make a robot or mobile platform move, they can also be solutions to the other design requirements. A servo is an integral component to any mobile solution and can help with power efficiency, communication, agility and dexterity. This webinar will touch on the challenges presented to robot designers and how servo drives can make them successful.
Presenter: Shane Beilke, Advanced Motion Controls: Executive Team – Product Strategy
Tags: AMC, Servo2Go, Advanced Motion Controls, Webinar, Mobile Automation, Servo Drive, Servo Amplifier, Servo Controller, robot, mobile platform, servo, automation, motion control
Galil Now Offers EPICS Driver Baselines October 3, 2014
Posted by Servo2Go.com in New Product Press Releases, Technical Support Information.Tags: EPIC Driver, Galil, Galil Motion Control, Motion Control, Motion Controller, Servo2Go
add a comment
EPICS stands for Experimental Physics and Industrial Control System. It is a set of open source, distributed software tools used extensively for scientific instruments such as particle accelerators, telescopes, and other large-scale experimental installations. Using EPICS, scientists are able to network together arbitrarily complex systems of nodes, such as motion controllers, PLCs, instrumentation, and other software and hardware agents. Using a read/write protocol called Channel Access, the Input/Output controllers (IOCs), can interact while providing high-level functionality and interaction for sophisticated physics applications.
Galil now offers the EPICS Driver Baseline. As shown in Illustration 1, this software provides communication drivers and device support to create a Galil EPICS IOC. The software comes with the basic support needed for building a feature-rich IOC including the following:
– Support for the DMC-3x01x, DMC-4000, and DMC-41×3 Ethernet based controllers. Galil communications libraries allow extension to PCI-based controllers such as the DMC-18×6, DMC-18×2, and DMC-18×0. The array access feature allows easy extension to Galil’s line of RIO-47xxx PLCs.
– Basic Motor Record Support, which is an EPICS IOC Record designed specifically for motion controllers. See Table for some example fields imn the EPICS Motor Record.
Using the EPICS Channel Access feature, Galil array data can be read and written directly from the EPICS network. Coupled with DMC code embedded on the controller, the EPICS user can easily extend the EPICS support to any desired Galil firmware feature or programmable function. The array access feature, which is part of the Galil EPICS driver, allows quick deployment in an EPICS system without requiring a deep knowledge of EPICS IOC development.
Field | Description |
---|---|
ACCL | Acceleration, Deceleration specified in seconds. Duration of the accel/decel region. |
ATHM | At home. State of HM input. |
DHLM | Dial High Limit. Essentially a soft forward end of travel. |
DLLM | Dial Low Limit. Essentially a soft reverse end of travel. |
DMOV | Motion complete Boolean. 1 = finished; 0 = moving.Uses motion complete bit from data record. |
EGU | Engineering units. Galil baseline normalized to counts/steps. |
ERES | Encoder step size in EGU |
HOMF | Home Forward. Set to 1 to initiate home. |
HOMR | Home Reverse. Set to 1 to initiate home. |
HVEL | Homing velocity. |
ICOF | Integral Gain (KI normalized). Valid range; 0.0 <= ICOF <= 1.0 |
JAR | Jog Acceleration (EGU/s/s). |
JOGF | Jog motor forward. Set to 1 to initiate jog forward. |
JOGR | Jog motor reverse. Set to 1 to initiate jog reverse. |
JVEL | Jog Velocity. |
MRES | Motor step size (EGU) |
PCOF | Proportional Gain |
REP | Raw Encoder Position |
RMP | Raw Motor Position. The contents of the hardware’s step-count register. |
STOP | Stop motion. Set to 1 to initiate stop (ST) |
VAL | Desired position. Will call a PA/PR to move the motor. |
VELO | Velocity (EGU/s) |
VMAX | Max Velocity (EGU/s) |
Table 1: Examples of helpful Motor Record Fields
Click on the link below to view Servo2Go’s family of Programmable Motion Controllers from Galil Motion Control.
http://www.servo2go.com/supplier.php?id=1031080104
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Motion Control Technology Handbook August 21, 2014
Posted by Servo2Go.com in New Product Press Releases, Technical Support Information.Tags: Machine Control, Motion Control, Motor Control, Servo Systems, Stepper Systems
add a comment
Published by Manufacturing Automation
Manufacturing AUTOMATION’s ‘Motion Control Technology Handbook’ is a digital magazine that focuses on Automation and Motion Control products and systems. Posted on MA’s website as an interactive flip-style magazine, the Technology Handbook provides market information, technical product information, tutorial video’s, white papers as well as trends within the Motion Control Industry.
This is a must-read for all to OEM machine builders, end users and system integrators. Click on the link below to view the Handbook.
http://mfgautomation.techhandbook.dgtlpub.com/2013/2013-11-30/home.php
Tags: Motion Control, Motor Control, Machine Control, Servo Systems, Stepper Systems
The DMC-40×0 and DMC-41×3 Now Have Twice The Program Memory! August 8, 2014
Posted by Servo2Go.com in New Product Press Releases.Tags: Automation, DMC-40x0, DMC-41x3, Galil, Galil Motion Control, Machine Control, Motion Control, Motion Controller, Motor Control, Servo System, Servo2Go, Stepper System
add a comment
Galil is pleased to announce our latest firmware release, revision 1.2, for the DMC-40×0 and DMC-41×3. This release provides an increase in program memory from 2000 x 80 characters to 4000 x 80 characters, and an increase in the total array elements from 16,000 to 24,000.
See complete story at: http://www.galilmc.com/techtalk/motion-controllers/the-dmc-40×0-and-dmc-41×3-now-have-twice-the-program-memory/
For more information on the Galil DMC-40×0 Controller, click on the link below-
https://www.servo2go.com/product.php?ID=101658&cat=
For more information on the Galil DMC-41×3 Controller, click on the link below-
https://www.servo2go.com/product.php?ID=105297&cat=
For more information, please contact:
Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Galil, Galil Motion Control, DMC-40×0, DMC-41×3., Motion Control, Motion Controller, Motor Control, Machine Control, Automation, Servo System, Stepper System, Servo2Go
Advanced PCB Mount Servo Drives May 21, 2014
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, AMC, Automation, BLDC Drive, Motion Control, PWM Amplifier, Servo Amplifier, Servo Drive, Servo Driver, Servo2Go, Sine Drive, Trap Drive
add a comment
Z-Drives from Servo2Go.com are µ-sized plug-in style servo drives capable of torque, velocity & position modes for brushed, brushless or voice coil motors.
- Digital & Analog architectures
- CANopen, RS232/485 & EtherCAT networks
- Commands over the network or with I/O
- PCB mounting
- Feedback including: TTL Encoders, 1Vp-p Encoders, Absolute Encoders and Hall Sensors
- 3A-30A continuous (6A-60A peak) models
- 40-175 VDC output
- Extended Environment models
More information on PCB Mount Servo Amplifiers from Advanced Motion Controls can be viewed at –
http://www.servo2go.com/search.php?search=Z-Drive&D=PROD
Toll Free Phone: (877) 378-0240
Toll Free Fax: (877) 378-0249
E-Mail: Contact Us
Tags: AMC, Advanced Motion Controls, Servo2Go, PWM Amplifier, Servo Amplifier, Servo Driver, Servo Drive, Motion Control, Automation, BLDC Drive, Sine Drive, Trap Drive
Plug-in Servos Provide Multiaxis Motion April 23, 2014
Posted by Servo2Go.com in New Product Press Releases.Tags: Advanced Motion Controls, AMC, Automation, EtherCAT, Motion Control, Servo Amplifier, Servo Drive, Servo System, Servo2Go
add a comment
Advanced Motion Controls has released four new EtherCAT Z-Drives to expand on the existing DZEANTU-020B080 EtherCAT node drives and the DZSANTU-020B080 sub-node drives. Extending the DigiFlex Performance product line AMC’s EtherCAT communication servo drives provide for multiple feedback devices in a variety of power platforms. Advanced Motion Controls EtherCAT products consist of panel mount and plug-in servo drives to allow for quick prototyping and ease of system integration. Panel mount DPE drives serve as nodes in single or multi-axis EtherCAT networks, while plug-in DZE/DZS drives utilize AMC’s unique, proprietary high speed multi-axis communication interface and I/O expansion capabilities (‘DxM’ and ‘DxI/O’ Technologies). Now a single EtherCAT node can accommodate a combination of up to 4 axes of motion with 32 digital inputs, 32 digital outputs, 4 analog inputs and 2 analog outputs each.
The result is a highly integrated high value motion control solution for single or multi-axis applications. – See more at:
https://www.servo2go.com/search.php?search=ethercat&D=PROD
Click on the link below for additional information-
AMC’s EtherCAT Servo Amplifiers
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: AMC, Advanced Motion Controls, EtherCAT, Servo2Go, Servo Drive, Servo Amplifier, Servo System, Automation, Motion Control
Tips for Using Galil Optoisolated Outputs: A New 2-Minute Video from Galil April 1, 2014
Posted by Servo2Go.com in Product Video's, Technical Support Information.Tags: Automation, Galil, Galil Motion Control, Motion Control, Motion Controller, Motor Control, Optoisolated Output, Optoisolation, Servo System, Servo2Go, Stepper System, Video
add a comment
Galil has recently added a new video to its growing library of 2-minute instructional videos. This latest video gives recommendations for wiring and supply voltages when connecting to the optically isolated outputs on Galil controllers. This video focuses on best practices for connecting the outputs between the controller and load, and for connecting an external power supply to assure true optical isolation is maintained. Proper connections when using the various output options such as sourcing or sinking, supply voltages, and current ratings are discussed. Techniques for by-passing the optical isolation circuitry are also presented. >>Watch Video
Click on the link below to view Servo2Go’s family of Programmable Motion Controllers from Galil Motion Control.
http://www.servo2go.com/supplier.php?id=1031080104
EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Galil, Servo2Go, Motion Control, Motion Controller, Motor Control, Automation, Servo System, Stepper System, Optoisolation, Video, Optoisolated Output