jump to navigation

Digital Brushless Servo Drive…Made Simple August 26, 2013

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , , , , , ,
add a comment

When you simply need a servo drive, the ElectroCraft CompletePower EA4709 servo drive keeps your innovation moving.  The EA4709 combines the performance and flexibility you’d expect from a digital drive with the ease-of-use and simple set-up of an analog drive, bridging the gap between performance and simplicity.

ElectroCraft EA4709

ElectroCraft EA4709

This four-quadrant brushless DC servo amplifier is fully enclosed in a rugged aluminum case which can be DIN-rail mounted of panel mounted for easy integration.  The drive can be configured in a variety of torque and speed control modes with the mode of operation being set by simple DIP switches.  Both the 9A and 18A versions of this drive have an adjustable current limit and can be powered by the same 9 – 70 VDC range of supply voltage.  The drive is protected against over-current and over-temperature and motor short-circuit and incorporates state of the art MOSFET technology for maximum efficiency. Connectivity is tool-free with RJ45-CAT5 connectors for control/feedback inputs and push-type terminals for supply power and motor connections.

More information on the ElectroCraft EA4709 from Servo2Go can be found at the link below-

http://www.servo2go.com/product.php?ID=105435&cat=

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

ADVANCED Motion Controls® analog Z-Drives now output nearly 5kW of peak power in a footprint smaller than a smartphone June 26, 2013

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , , , ,
add a comment

Available immediately are 6 new analog Z-Drive models with increased current output of 60A peak and 30A continuous designed with the same footprint and pin functionality as the previous 40A versions.  These new servo drives provide 50% more power in the same space, making upgrades in power output a simple drop-in replacement.  Included are models compatible with brushed and brushless permanent magnet servo motors, with current and velocity mode operation and options for +/-10V or PWM & Direction commands.

Advanced Motion Controls Z-Drive

Advanced Motion Controls Z-Drive

New Models:  AZ60A8, AZB60A8, AZ60A8DDC, AZBDC60A8, AZBH60A8, AZBE60A8

Z-Drives are plug-in style servo drives from ADVANCED Motion Controls that mount directly to the PCB enabling fully integrated designs while simplifying wiring and installation.  With a total of 72 models now available, Z-Drives come with a long list of options to meet every need including:

  • Digital and analog architectures
  • CANopen, RS232/485 and EtherCAT networks
  • Commands over the network or with I/O
  • Feedback including: TTL Encoders, 1Vp-p Encoders, Absolute Encoders and Hall sensors
  • 6-60A peak and 3-30A continuous
  • 40-175 VDC
  • Extended Environment options

More information on the Z Drives from Advanced Motion Controls can be found at the link below-

http://www.servo2go.com/search.php?search=smartphone&D=PROD

A copy of this Press Release can be viewed at-

http://www.servo2go.com/news.php?id=111

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Tags:   AMC, Advanced Motion Controls, Servo Amplifier, Brushless Amplifier, PCB Amplifier, Servo2Go, BLDC Amplifier

Free Online Motion Control Tutorials from Galil Motion Control June 11, 2013

Posted by Servo2Go.com in Product Video's, Technical Support Information.
Tags: , , , , , , ,
add a comment

On-Line Tutorials

Learn all about motion and I/O control by viewing Galil’s informative on-line tutorials.  Over 30 video’s to choose from.

Choose from a variety of educational topics:

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

Achieve Superior Servo Performance, Quickly, with Auto-Tuning May 28, 2013

Posted by Servo2Go.com in Technical Support Information.
Tags: , , , , , , , , ,
add a comment

New White Paper:  Achieve Superior Servo Performance, Quickly, with Auto-Tuning

Source:  Kollmorgen Engineer’s Library

Achieve Superior Servo Performance, Quickly, with Auto-Tuning

Compliance in transmission components tends to decouple the load’s inertia from the servo system at higher frequencies.  First-generation auto-tuners didn’t take this “rubber band effect” into account, and even the best tuning specialists need lots of time and a little luck to get optimum performance.  Kollmorgen’s chief engineer of servo technology, George Ellis, explains how full-frequency auto-tuning can achieve perfect performance in a matter of minutes.

Click on the link below to download this White Paper.

http://www.kollmorgen.com/uploadedFiles/kollmorgencom/Service_and_Support/Knowledge_Center/White_Papers/KOL-Auto-Tuning-WP-04-11-vSEO.pdf

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

Trapezoidal vs Sinusoidal Brushless Servo Amplifiers May 23, 2013

Posted by Servo2Go.com in New Product Press Releases, Technical Support Information.
Tags: , , , , , , , , , , , , ,
add a comment

Originally posted on June 30th, 2011 by John Hayes at Galil Motion Control

Galil AMP-43540 Sinusoidal Servo Amplifier

Galil AMP-43540 Sinusoidal Servo Amplifier

The new Galil Sine drive amplifiers are a welcome addition to the existing DMC-40×0 and DMC-41×3 line-up of servo and stepper amplifiers – yet the addition of the new amplifiers also brings up a question  – “When should I use a sinusoidal drive instead of a trapezoidal drive?”.  This article will go over the Galil brushless servo drive architecture and highlight what you should know when making an amplifier selection.

Two Loop Architecture

In order to gain a better understanding of servo amplifiers and specifically how the Galil servo amplifiers work, the first thing to do is to understand the Controller/Amplifier architecture.  Unlike most single axis drives on the market, Galil uses a split sample rate.  The first and highest speed sample rate occurs on the amplifier and is used on the current loop.  The D3540 Sinusoidal amplifier runs its current loop at 33 kHz and the D3040 Trapezoidal amplifier runs at 66 kHz (which can be increased to 120 kHz for low inductance applications).  The benefits of a high speed current loop are:

  • Fast response to desired current/velocity command signal
  • Less destabilizing phase shift on the position loop
  • Tighter more accurate control – 16bit resolution
  • High Closed Loop Frequency (3-4 kHz)

The second loop in the system is the position loop.  Because of the limitations of real world mechanics, a position loop generally has a closed loop frequency in the range of 20 to 200 Hz.  The sample rate required to achieve this is only from 1 kHz to 4 kHz.  Note that the DMC-4000 can have a sample rate of up to 16 kHz and can control up to 8 axes allowing all axes to be tightly coupled.  General motion control applications run optimally at a 1 kHz position loop update.  High performance and high resolution applications can be run at higher rates depending on the required performance.

Separate processors for the Amplifier and Controller allow for this two loop Architecture which allows Galil to be extremely responsive and highly accurate and also perform whatever functions are required in a user’s application.

Trapezoidal vs. Sinusoidal Commutation

Trapezoidal commutation is the most cost effective way of controlling a brushless servo motor.  It is perfect for higher speed applications and applications where the motor and mechanics will eliminate the torque ripple that occurs during switching current from one phase to the next.  Hall sensors are required for Trapezoidal commutation.

Sinusoidal commutation is great for lower speed, direct drive or linear motor applications where the torque ripple of the motor phases needs to be minimized.  Since the current to the motor phases are weighted as sine waves, the torque going through the motor is smooth and has minimal ripple.  It also allows the mechanics to be simplified because Hall sensors can be eliminated.

Sinusoidal amplifiers rely on an initialization sequence at power-up to provide the correct commutation.  This can be done in one of 3 ways on the Galil.    The first and most common method is the BX command that uses an algorithm that energizes the phases and determines the brushless angle.  Only a small amount of motion (if any) is shown with this method.  The second method is to use the BC command that requires Hall sensors to be hooked up.  It will move the motor and use the first hall transition as the basis for the commutation.  This method is necessary if there is an external force on the motor such as a gravity load.  The third method uses the BZ command to drive the motor to the zero degree commutation point which can result in a jump to the closest zero phase.

More info on Galil Sinusoidal Amplifiers

The new AMP-43540 drives four brushless motors operating at up to 8 Amps continuous, 15 Amps peak, 20-80 VDC.  The gain settings of the amplifier are user-programmable at 0.4, 0.8, and 1.6 Amp/Volt.  The amplifier offers protection for over-voltage, under-voltage, over-current, short-circuit and over temperature. A shunt regulator option is available.  For more information, please see: DMC-40×0 Product Page .

For additional information on the DMC-40×0 Accelera Series and new AMP-43540 option, see

http://www.servo2go.com/product.php?ID=101658&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

Sin/Cos Encoders and Sinusoidal Drives help Galil Controllers Achieve Ultra-Precise Motion May 18, 2013

Posted by Servo2Go.com in Technical Support Information.
Tags: , , , , , , , , , , ,
add a comment

Introduction

The use of linear motors for precision motion applications has increased as technology has improved.

Galil DMC-31012 Motion Controller

Galil DMC-31012 Motion Controller

A linear motor typically uses a servo drive with sinusoidal commutation to minimize torque ripple and provide quiet smooth motion. It is also becoming more common for linear motor manufacturers to provide position feedback in the form of an analog sin/cos encoder as this method uses the signals from the motor magnets and is more cost-effective.  Galil motion controllers now provide options for sinusoidal drives and interpolation of sin/cos analog feedback for smooth control of ultra-high performance applications.

Galil controllers use an intelligent interpolation algorithm allowing inexpensive sin/cos signals to be used successfully in high-precision applications.   The AF command is used to set the analog feedback resolution at 2n counts/period. Galil drives perform sinusoidal commutation and are easily programmed using a choice of three different commutation methods.  An example showing how to configure Galil controllers and sine drives for use with linear motors with sin/cos encoders is below.

An example of a Galil Controller used with a Copley ServoTube Linear Motor

Galil’s DMC-31012 motion controller with an internal 800W sinusoidal drive and sin/cos feedback interpolation option was used  in an application with a Copley ServoTube linear motor with  sin/cos encoder. The goal was to move a stage and maintain a position accuracy of .04mm.   The stage manufacturer specified a 25.6 mm/sin feedback period for the encoder signals which is equivalent to the motor’s magnetic cycle.

The AF command was used to interpolate the analog feedback at 2n counts/period. N= 10 was used for this application.  AF 10 provided an interpolation of 1024 counts/period.  The system position resolution can be calculated using the equation below:

Resolution = 25.6mm /1024 counts = .025mm/count

.025mm/count resolution is within our target accuracy of .04mm.

It’s important to note that sin/cos feedback sensors are analog and more prone to noise compared to a digital signal. The DMC-31012 allows an AF of 12 but AF 10 was chosen because it met the accuracy specifications while minimizing the affect of noise.

There are three methods to initialize sinusoidal commutation with Galil sinusoidal drives, BI, BZ and BX.  For this application, the BZ command method was selected because it was better for high static friction. The BI command, which uses halls to initially commutate, is ideal in most cases but the Copley motor did not provide Hall sensors.

Another parameter used for commutation was the BM command.  BM is the brushless modulus of the system or the length for which one magnetic cycle completes. For the Copley ServoTube, the motor’s sin/cos period is the same length as the motors magnetic cycle.  For AF 10, the setting for BM is 1024.

Once AF, BZ and BM were configured during initialization, the controller system was tuned for optimum performance using the GalilSuite tuning software.

Galil controllers with the sin/cos feedback option and sinusoidal drives provide a good solution for controlling linear motors with a high degree of accuracy and extremely smooth commutation. Sinusoidal drives and sin/cos feedback options are available on Galil’s DMC40x0 multi-axis controller and the DMC-31012 single-axis controller.

For more detailed information, see application note #5523 “Connecting to a Linear Motor with Sinusoidal Commutation and Sin/Cos Feedback.” http://www.galilmc.com/support/appnotes/miscellaneous/note5523.pdf

For additional information on the DMC-31012 from Galil can be found at-

http://www.servo2go.com/product.php?ID=105334&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

Galil DMC-40×0 Accelera Series Now Available with 2 Ethernet Ports May 2, 2013

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , , , , , , ,
add a comment

Galil has just released the latest model in the DMC-40×0 Accelera Motion Controller Series. There is now a -C022 option that provides two Ethernet ports for easy-daisy chaining of multiple controllers. The -C022 option is available for 1- through 8-axis versions of the DMC-40×0 motion controller. For example, DMC-4060-C022 specifies a 6-axis model with dual Ethernet ports.

Galil DMC-4000 Motion Controller

The DMC-40×0 is part of Galil’s latest generation Accelera series. Based on a powerful RISC processor Accelera controllers provide ultra high-speed with 40 microsecond command processing,  up to 32kHz servo update rates, and acceptance of encoder inputs up to 22MHz. Other features include optically isolated inputs and outputs, high power outputs for driving brakes and relays, uncommitted analog inputs, dual encoder inputs for each axis, and plenty of program memory for storing application programs.

The DMC-40×0 provides precise control of a variety of motors including brush servos, brushless servos, steppers and piezo ceramic motors. It can be easily connected to external drives of any size or to internal multi-axis drives contained within the DMC-40×0 controller.  The DMC-40×0 controllers with internal drives reduce space, cost and wiring. Table 1 shows the  multi-axis drive options available for the DMC-40×0 series.

Internal multi-axis drive options

As a combined controller and drive unit, the DMC-40×0 is compact and measures 8.1” x 7.25” x 1.72” for the 4-axis model and 11.5” x 7.25” x 1.72” for the 8-axis model. The unit accepts power from a single DC supply between 20-80VDC.

For additional information on the DMC-40×0 Accelera Series and new -C022 dual Ethernet port option, see

http://www.servo2go.com/product.php?ID=101658&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

New Servo Indexing Capabilities in latest release of DriveWare®7 Software April 7, 2013

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , , ,
add a comment

DriveWare® 7 Release

DriveWare® 7 Software

DriveWare® 7 Software

Advanced Motion Control’s of Camarillo, CA are excited to announce the latest release of their configuration software, DriveWare®7 (DW7).  This latest version introduces significant upgrades in layout and drive control features.  With a cleaner user interface, information rich screens, new icons, customizable toolbars, tab groups, preset themes, Windows XP and 7 compatibility, users will find that configuring their drives is now easier and more precise than ever. DW7 is used to commission, troubleshoot, and integrate all ADVANCED Motion Controls’ Digiflex® Performance™ digital servo drives and is now available for download.

New with DW7

  • New indexing capabilities to create up to 16 unique index tasks by defining position, velocity, and acceleration/deceleration values where indexes can be either Relative or Absolute motion profiles.
  • Servo drives can now store two different configuration settings that include unique Loop Configuration, Gain Set, Command Source and Command Limiter settings simplifying machine design and maintenance for the engineer by allowing switching between each.
  • On-the-fly Mode Switching to allow machine programmers for example to switch from velocity mode for a long constant speed move directly to position mode so the motor can be precisely positioned at the end of the move to a specific location.
  • The new Drive Status Panel presents users with a simple sortable organization of drive status, critical event activity and event counters to quickly identify faults.
  • Network communication settings have been made more configurable for EtherCAT®, CANopen and RS-485/232 allowing independent adjustment of those used to connect to DW7.
  • Mappable PDOs to configure, edit, and map RPDOs and TPDOs and the ability to assign CANopen TPDOs to specific drive events.

Digiflex® Performance™ digital servo drives built in 2012 and later can take advantage of these new features, we highly recommend that you download DW7 and take it for a spin!

DriveWare® 7 software is used to commission, troubleshoot, and integrate all AMC Digiflex® Performance™ digital servo drives. All drive limits, control loops (current, velocity, and position), and event handling can be configured in DriveWare. Notable features include a fully functional multi-channel oscilloscope, function generator and user friendly layout and interface.

System Requirements:

Windows XP, Windows 7, .NET 4.0 Framework

Minimum 1 GHz, Minimum 2GB RAM

Technical documentation on DriveWare® 7 software can be found at the link below-

http://www.a-m-c.com/products/driveware.html

For more information on the Digiflex® Performance™ digital servo drives available  from Servo2Go, click on the link below-

http://www.servo2go.com/supplier.php?id=1031080098

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

Join the New LinkedIn Group ‘Motion Control Fundamentals’ March 4, 2013

Posted by Servo2Go.com in News & Events, Product Video's, Technical Support Information.
Tags: , , , , , , , , , , , ,
1 comment so far
Motion Control Fundamentals LinkedIn Group

Motion Control Fundamentals LinkedIn Group

Created by Electromate.com, this Technical Group strives to advance the knowledge of the fundamentals of Electro-mechanical Motion Control.  We welcome regular posts by group members of any Technical Notes & White Papers, Video’s, Webinars, Podcasts, Engineering Formulae, Sizing Software, etc., related to the discipline of Motion Control.  We appreciate your participation and encourage your comments.

If you are novice or technically proficient user of Motion Control products/systems, please join this group.  No Job Postings please.

Click on the link below to join now.

 

http://www.linkedin.com/groups/Motion-Control-Fundamentals-4883684/about

Tags: Motion Control, Motor Control, Machine Control, Mechatronics, High-Tech Systems, Robotics, Automation, Servo Systems, Stepper Systems, Linear Motion, Rotary Motion

Extended Environment Servo Amplifiers December 8, 2012

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , , ,
add a comment

The DZX series of digital servo drives from Advanced Motion Controls are designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications.  These fully digital drives operate in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.  The command source can be generated internally or can be supplied externally.  In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

Advanced Motion Controls DZX Servo Amplifier

Advanced Motion Controls DZX Servo Amplifier

DZX amplifiers feature an RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking.  Drive commissioning is accomplished using DriveWare available at http://www.a-m-c.com.

All drive and motor parameters are stored in non-volatile memory.

The DZX amplifiers conform to the following specifications and are designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.

>Extended Environment Temperature -40°C to +75°C (-40°F to +167°F)
> Storage Temperature -50°C to +100°C (-58°F to +212°F)
> Thermal Shock -40°C to +75°C (-40°F to +167°F) in 2 min.
> Relative Humidity 0 to 95% Non-Condensing
> Vibration 30 Grms for 5 min. in 3 axes

Z-Drives are a culmination of advances in manufacturing technology.  By utilizing dual sided PCB boards, high efficiency power devices and creative design we are able to make the Z-Drives possible.  These drives have been designed to be integrated into your PCB and come in multiple architechtures with features previously found only in larger drives.  No wires and smaller size = less cost and easier installation – just plug’m in!

Features include:

  • Four Quadrant Regenerative Operation
  • Space Vector Modulation (SVM) Technology
  • Fully Digital State-of-the-art Design
  • Programmable Gain Settings
  • Fully Configurable
  • PIDF Velocity Loop
  • PID + FF Position Loop
  • Compact Size, High Power Density
  • 16-bit Analog to Digital Hardware

For more information on the Extended Environment Servo Amplifiers from Advanced Motion Controls, click on the link below-

http://www.servo2go.com/search.php?search=Extended Environment&D=PROD

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com