jump to navigation

XYZ Gantry Carries the Load August 21, 2012

Posted by Servo2Go.com in Product Video's.
Tags: , , , , , ,
add a comment
Zaber Technologies G-LSQ XYZ Gantry System

Zaber Technologies G-LSQ XYZ Gantry System

This video shows a 450 mm travel, low profile, XY Gantry system with a 150 mm Z-axis. This system is composed of several LSQ stages and three stepper motor controllers. Cable carriers are included to provide increased cable protection and to reduce wiring clutter.

Combining several linear low-profile stages, this gantry system is decked out for multi-axis applications that have to support heavier loads.  Flex cables run neatly to three stepper motor controllers, keeping system movement reliable and uncluttered.  The system supports loads to 18 kg and can reach speeds of 330 mm/s.

For more information on the G-LSQ XYZ Gantry System from Zaber Technologies, click on the link below- http://www.servo2go.com/product.php?ID=105304

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber Technologies G-LSQ XYZ Gantry System Video July 19, 2012

Posted by Servo2Go.com in Product Video's.
Tags: , , , , , ,
add a comment
Zaber G-LSQ Gantry Video

Zaber G-LSQ Gantry Video

This video shows a 450 mm travel, low profile, XY Gantry system with a 150 mm Z-axis. This system is composed of several LSQ stages and three stepper motor controllers. Cable carriers are included to provide increased cable protection and to reduce wiring clutter.

For more information on the G-LSQ Gantry Systems from Zaber, click on the link below:

http://www.servo2go.com/product.php?ID=105304&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

New A-BLQ-E Closed-Loop Belt-Driven Linear Stage with Built-in Stepper Motor/ Encoder/Controller from Zaber March 26, 2012

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , ,
add a comment

Zaber’s A-BLQ-E series products are computer controlled, belt-driven linear stages with integrated stepper motors and controllers. A built-in rotary encoder allows closed-loop operation with slip/stall recovery features. They are stand-alone devices requiring only a standard 48 volt power supply for operation. A knob at the end of the stage permits smooth manual control; press and hold to switch between velocity and displacement mode and turn to move the stage.

Zaber's A-BLQ-E Belt Driven Actuator

The stages connect to the RS-232 port of any computer and can be daisy-chained with up to 254 A or T-series devices per chain. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extensions can be used.

With travel lengths up to 2.1 m, and a maximum speed of 2.0 m/s, A-BLQ-E stages are perfect for rapid positioning over large distances. Their high load capacity and excellent torsional stiffness make them suitable for large payloads, while 10 µm repeatability allows these stages to be used for precise positioning as well.

Summary:

• 70, 145, 295, 445, 595, 1045, 1495, 2095 mm travel
• Up to 2 m/s speed, 18 N thrust, and 20 kg load capacity
• Encoder position feedback with slip/stall detection & automatic recovery
• Built-in controller daisy chains with other A and T-series products

Click on the link below for additional information-

Zaber’s A-BLQ-E Series

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

New Product Video: Zaber Gantry System: T-G-LSM200A200A February 26, 2012

Posted by Servo2Go.com in Product Video's.
Tags: , , , , ,
add a comment

http://youtu.be/rsplSqYrwPU

Zaber’s Gantries are designed for multi-axis applications where load and travel requirements exceed the rated cantilever load specs of Zaber’s simpler XY or XYZ systems.

In the T-G-LSM200A200A system (shown), a synchronized pair of lead-screws provide very low backlash and high stiffness.  Gantry systems include a base-plate with a full M6 on 25 mm grid of mounting holes, integrated high flex cable and cable management system.

The T-G-LSM gantry systems are composed of three linear stages with integrated controllers, a base-plate with a full M6 on 25 mm grid of mounting holes, integrated high flex cable and cable management system. In addition, these gantries are available in 100 or 200 mm travel per axis (custom lengths available), have a low profile – 70 mm overall height, and are customizable i.e. add another Zaber stage for a Z-axis.

In this video, the gantry system is moving a 9.4 kg (20.68 lb) load.

Click on the link below for additional information-

Zaber’s T-G-LSM High Load, Motorized Gantry System

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber’s A-LST-C Series High Load, Motorized Linear Stages with Dust Covers February 19, 2012

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , ,
add a comment

 

Zaber's A-LST-C Series High Load, Motorized Linear Stages with Dust Covers

Device Overview:

  • 254, 500, 750, 1000 and 1500 mm travel  
  • 100 kg load capacity
  • Up to 420 mm/s and up to 560 N thrust
  • Built-in controller; daisy chains with other A-series and T-series products

Description:

Zaber’s A-LST-C stages are computer-controlled and have travel ranges from 254 mm up to 1500 mm. These stages are available with various leadscrew pitches so you can select the device with the resolution and speed capability that you need. Zaber’s innovative stage design is capable of speeds up to 420 mm/s, and can support loads up to 100 kg. The flexible, stainless steel dust cover protects the internal lead-screw and bearings.

Click on the link below for additional information-

Zaber’s A-LST-C Series High Load, Motorized Linear Stages with Dust Covers

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber Technologies Releases its G Series Gantry System March 8, 2011

Posted by Servo2Go.com in New Product Press Releases, Uncategorized.
Tags: , , , , ,
add a comment

Zaber's Turnkey Gantry System

Series Overview: 

  • 100 or 200 mm travel per axis (custom lengths available)
  • Low profile – 70 mm overall height
  • Customizable – add another Zaber stage for a Z-axis

Description:

Zaber’s Gantries are designed for multi-axis applications where load and travel requirements exceed the rated cantilever load specs of Zaber’s simpler XY or XYZ systems. In addition, Zaber’s Gantries are designed for use where access is required to the entire area under the system. A synchronized pair of lead-screws provide very low backlash and high stiffness. Gantry systems include a baseplate with a full M6 on 25 mm grid of mounting holes, integrated high flex cable and cable management system.

Click on the link below for additional information-

T-G-LSM Series Product Information

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak        warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber Release New Rotary Stage March 6, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: ,
add a comment

Zaber is proud to announce the release of its new rotary stage, the RS60. Zaber’s RS60 rotary stage provides precise, continuous 360° rotation in a compact package. The robust bearing design allows the stage to handle up to 44 lb of load. A precision worm gear provides a 120:1 ratio allowing a stage resolution of 0.00023°. Coupled with Zaber’s T-MCA controller, it can reach speeds of up to 11.7 rpm and torque up to 80 N-cm.

Zaber's RS60 Rotary Stage

Click on the link below for additional information-

RS Series Product Information

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak        warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

New LSM Series Linear Stages from Zaber March 3, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , ,
add a comment

Zaber’s LSM series devices are motorized linear stages with high thrust and speed capabilities and a very compact size. They are designed to be used with our T-MCA controller, or can be used with any 2-phase stepper motor controller. At only 21 mm high, these miniature stages are excellent for applications where a small profile is required. The LSM’s innovative design allows speeds up to 58 mm/s and loads up to 10 kg. Like all Zaber’s products, the LSM series is designed to be ‘plug and play’ and very easy to set-up and operate when used with our T-MCA controller. The stages can be mounted in XY and XYZ configurations with no additional hardware.

Zaber's LSM Series

Series Overview: 

  • 25, 50, 100, 150 and 200mm travel 
  • 10kg load capacity and up to 58 mm/s speed  
  • Very low profile at only 21mm stage height 
  • Designed for Zaber’s T-MCA series stepper motor controller or can be used with any 2-phase stepper motor controller 
  • Using the powerful T-MCA external controller means that the unit can go faster than the T-LSM, with more thrust 
  • Can be mounted in XY and XYZ configurations

Click on the link below for additional information-

LSM Series Product Information 

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber Technologies Releases its 2nd G-Series Gantry System January 10, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , ,
add a comment

Series Overview:

Zaber's G-LSQ XY Gantry System

  • 150, 300 or 450 mm travel per axis
  • Versatile – up to 330 mm/s speed or 100N thrust depending on leadscrew choice
  • Customizable – add another Zaber stage for a Z-axis

Description:

Zaber’s G-LSQ series gantry systems are based on the robust and fast T-LSQ series linear stages. These systems offer a complete turn-key solution including 2 T-MCA controllers, power supplies, and all the accessories needed to operate the system. They are available pre-assembled on a custom breadboard, or as separate components, ready to be integrated into your own setup. The G-LSQ series gantries are designed for multi-axis applications where heavier loads require additional support or where access is required to the area under the system. A coupled leadscrew design provides high stiffness for quick and precise response. These gantries will support loads up to 18 kg and can move at speeds up to 330 mm/s.

Click on the link below for additional information- 
http://www.servo2go.com/product.php?ID=105304 

For more information, please contact: 

EDITORIAL CONTACT:
Warren Osak        warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Zaber Technologies Releases T-LST Series High Load Linear Stages January 7, 2011

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , ,
add a comment

Series Overview: 

Zaber's T-LST High Load Motorized Linear Stages

  • 254, 500, 750, 1000 & 1500 mm travel versions
  • 100 kg load capacity  
  • Up to 420 mm/s and up to 560 N thrust
  • Built-in controller; daisy chains with other T-series products  

Zaber’s T-LST series products are computer controlled motorized linear stages with a variety of lead screw pitches and travels. They are stand-alone units requiring only a standard 48V power supply. A potentiometer knob at the end of the unit permits smooth manual control; turn it fully to get maximum speed. The stages connect to the RS-232 port of any computer and can be chained with up to 254 units per chain. They can also be chained with any other T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extension can be used.

Click on the link below for additional information- 
http://www.servo2go.com/product.php?ID=105305

For more information, please contact: 

EDITORIAL CONTACT:
Warren Osak        
warren@servo2go.com 
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com