jump to navigation

STAC5 – NEW Lower Price for Microstepping Drive March 18, 2014

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , ,
add a comment

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply, and features…      

  • High performance
  • Built-in power supply & regeneration clamp
  • 120 and 220 VAC models
  • Accepts pulse & direction, streaming commands, stored programming
  • 10/100 MBit Ethernet & EtherNet/IP
  • Advanced anti-resonance
  • Matching high performance motors
AMP's STAC5 Microstep Driver with HT23 Motor

AMP’s STAC5 Microstep Driver with HT23 Motor

The STAC5 provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds.  An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times.

The STAC5 is available in 120VAC and 220VAC versions, both housed in a compact package.

All STAC5 models include 100Mbit Ethernet communication.  The Ethernet interface is used to configure the STAC5 and motor, and also supports the SCL and Q languages over standard Ethernet cabling, addressing and protocols.There are 3 control options available with the STAC5 stepper drives: S, Q and IP.

  • “S” drives can operate in pulse & direction, velocity, and streaming serial (SCL) control modes.  To select the control mode, as well as to setup the motor and configure other drive parameters, use the ST Configurator™ software.
  • “Q” drives can operate in all of the same control modes as an S drive, plus they have the ability to run stand-alone Q programs stored in non-volatile memory.  Q programs are created using the Q Programmer™ software, which provides multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language.  Like S drives, Q drives must first be setup and configured using the ST Configurator™ software.
  • “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications.  With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec.  The STAC5-IP drives run all of the same control modes as STAC5-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming.  STAC5-IP drives are setup and configured using ST Configurator™, and Q programs are created using Q Programmer™.

An encoder feedback option provides position verification, stall detection and/or stall prevention.  Applied Motion’s proprietary stall prevention algorithm monitors rotor lag and automatically reduces speed or acceleration to avoid motor stalls, allowing 100% torque utilization.

The STAC5 can be purchased with a wide range of high torque step motors, optimized for use with the drive.  Three lengths of HT23 are available in single and double shaft configurations:  HT23-552, HT23-553 and HT23-554, with holding torque ranging from 84 to 255 ounce-inches.  Three lengths of HT34 are also available in single and double shaft configurations:  HT34-495, HT34-496 and HT34-497, with holding torque ranging from 550 to 1700 ounce-inches.

For more information on the STAC5 Stepper Drives from Applied Motion Products, click on the link below:

https://www.servo2go.com/product.php?ID=105241&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Tags:  Step Drive, Stepper Driver, Step Driver, Step Motor, Automation, Motion Control, Servo2Go, Applied Motion Products

Introducing the Compact, Powerful STR2 Microstepper Driver June 4, 2012

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , ,
add a comment
Applied Motion Products 'STR2 Microstep Driver

Applied Motion Products ‘STR2 Microstep Driver

Applied Motion Products is pleased to announce the STR2 step motor drive.  The STR2 is a compact, digital step & direction drive, great for OEM applications requiring basic step & direction control of a 2-phase stepper motor.  The STR2 outputs up to 2.2 A/phase to the step motor, and is compatible with a variety of 2-phase step motors that have been selected to optimize performance of both the drive and motor.

The STR2 drive features advanced microstepping performance and sophisticated current control with anti-resonance. Anti-resonance electronically damps motor and system resonances, which improves motor smoothness and torque over a wide speed range.

Each STR2 step motor drive operates in either Step & Direction or Pulse/Pulse control mode. Selecting between these two modes is done by moving a jumper located under the cover of the drive. Each STR2 drive can microstep up to 20,000 steps/rev with a 1.8º step motor (1/100 step), and can even microstep the step motor when the command pulses are low resolution. This feature is called Microstep Emulation. All drive setup is done via dip switches on the side of the drive, including motor selection, running current, idle current, and step resolution.

The STR2 is RoHS compliant and CE certified.  Matching step motors and DC power supplies are also available from Applied Motion Products.

50 piece pricing begins at $75 US/ea

For more information on the STR2 Microstep Driver from Applied Motion Products, click on the link below:

http://servo2go.com/product.php?ID=105421

For more information, please contact: 

Editorial Contact:
Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com